True/False
Indicate whether the sentence or statement is true
or false.
|
|
|
1.
|
Eye
protection is not necessary while operating the lathe.
|
|
|
2.
|
Always lubricate the dead center before turning.
|
|
|
3.
|
It is
safe to set or leave the lathe at high speed when turning rough stock into a cylinder.
|
|
|
4.
|
The
larger the diameter of the work piece being turned; the faster the lathe can be operated
safely.
|
|
|
5.
|
The
tool rest must be removed while sanding.
|
|
|
6.
|
A
space of 1" between the tool rest and the work piece is safe.
|
|
|
7.
|
The
safety shield must be lowered anytime the work piece is spinning.
|
|
|
8.
|
It is
safe to turn work that is not balanced.
|
|
|
9.
|
The
turning stock should be revolved by hand to be sure that it clears the tool rest before turning on
the lathe.
|
|
|
10.
|
The
top of the tool rest should be 1/8" above the center of the work piece.
|
Completion
Complete each sentence or statement using the words
in the following word bank.
Hammer Grain
Free
Oil
Defects
Gouge
Mallet
Speed-up Center
Turn-off
Secure
|
|
|
11.
|
You
must locate the __________________ of the work piece on each of the ends.
|
|
|
12.
|
When
setting a spur center you should use a ________________ to strike the spur center.
|
|
|
13.
|
Before starting the wood lathe, check all adjustments and locks to ensure that they
are ____________.
|
|
|
14.
|
Always _______________ the wood lathe before making any adjustments to the tool rest
or the tail stock.
|