True/False
Indicate whether the sentence or statement is true
or false.
|
|
|
1.
|
You must pass the
safety test with 100% correct before using the shaper.
|
|
|
2.
|
It is safe to
shape pieces less then 2” wide.
|
|
|
3.
|
It is unsafe to
shape stock that has a loose knot in it.
|
|
|
4.
|
It is Safe to
allow your stock to “back up” when using the shaper.
|
|
|
5.
|
Stock must be at
least 10” long to run through the shaper.
|
|
|
6.
|
The operator must
disconnect or lockout the power before installing or removing the cutter.
|
|
|
7.
|
It is safe to feed
stock through the cutter as fast as possible.
|
|
|
8.
|
It is important to
check the direction that the cutter is moving before feeding stock into the cutter.
|
|
|
9.
|
The cutter must
come to a complete stop before leaving the shaper.
|
|
|
10.
|
You must have the
instructor check your setup before attempting to cut any stock.
|
Multiple Choice
Identify the
letter of the choice that best completes the statement or answers the question.
|
|
|
11.
|
Adjust the shaper
fences to within ________ of the cutter.
|
|
|
12.
|
Always set the
shaper up to cut ____________ the direction of the cutter when feeding the stock into the
cutter.
|
Completion
Complete each sentence or
statement.
|
|
|
13.
|
Stock must be at
least ________ wide to shape on the shaper.
|
|
|
14.
|
Stock must be at
least ________ long to shape on the shaper.
|
|
|
15.
|
When checking the
setup it is important not to touch the __________ .
|