True/False
Indicate whether the sentence or statement is true
or false.
|
|
|
1.
|
It is
safe to make adjustments to the planer while a board is in the planer and it is
running.
|
|
|
2.
|
Never
look into the throat of the planer-surfacer while it is running.
|
|
|
3.
|
When
using the planer-surfacer you must be wearing eye protection.
|
|
|
4.
|
A
board shorter then 14” can be surfaced safely with standard operating procedures.
|
|
|
5.
|
Always ask the instructors permission before using the planer-surfacer.
|
Completion
Complete each sentence or
statement.
|
|
|
6.
|
The
maximum cut on the planer is ______________inch.
|
|
|
7.
|
A
board must be at least __________thick to be run through the planer without a backing
board.
|
|
|
8.
|
Always stand to __________ __________ of the planer when running stock
through it.
|
|
|
9.
|
Never
run__________ wood through the planer.
|
Matching
|
|
|
If a
board does not feed through the planer, match the five steps that must be completed in the proper
sequence in the blanks below a. | notify instructor | d. | lower the table | b. | shut off
planer | e. | wait until blade
stops | c. | remove the board | | | | |
|
|
|
10.
|
1st
Step
|
|
|
11.
|
2nd
Step
|
|
|
12.
|
3rd
Step
|
|
|
13.
|
4th
Step
|
|
|
14.
|
5th
Step
|