True/False
Indicate whether the sentence or statement is true
or false.
|
|
|
1.
|
You must use the
guard unless specific permission is obtained from the instructor.
|
|
|
2.
|
You must use a
push stick when cutting wood less then 4” wide.
|
|
|
3.
|
The splitter must
always be used when cutting through the stock.
|
|
|
4.
|
It is safe to
remove short cutoffs when the saw blade is still moving.
|
|
|
5.
|
The blade can be
set to any height as long as it cuts through the stock.
|
|
|
6.
|
It is safe to saw
warped or twisted wood.
|
|
|
7.
|
It is safe saw
freehand (without using the fence or miter gauge).
|
|
|
8.
|
The operator
should stand directly in front of the saw blade while operating the table saw.
|
|
|
9.
|
The operator
should devote 100% attention to the stock and saw when operating the table saw.
|
|
|
10.
|
The stock edge
that goes against the fence must be trued (jointed so that it is straight).
|
|
|
11.
|
You must wear eye
protection when operating the table saw.
|
|
|
12.
|
A tail off person
must assist when ripping on the table saw.
|
|
|
13.
|
The tail off
person should never pull stock through the blade.
|
|
|
14.
|
It is safe to cut
through a loose knot on the table saw.
|
Multiple Choice
Identify the
letter of the choice that best completes the statement or answers the question.
|
|
|
15.
|
You may use a
machine if a. | You have the
instructor's permission | c. | The instructor
is in the shop | b. | You have passed all safety tests with
100% | d. | all of the
above | | | | |
|
|
|
16.
|
Set the height of
the blade ______________ above the stock.
|
|
|
17.
|
Stock must be at
least ______ long to safely rip on the table saw unless specific permission is obtained from the
instructor.
|
|
|
18.
|
Never use the
___________________________________ when cutting completely through the stock. a. | miter gauge and
rip fence | c. | push stick and
rip fence | b. | miter gauge and guard | d. | guard and rip fence | | | | |
|
Completion
Complete each sentence or
statement.
|
|
|
19.
|
You must
__________ the blade below the tabletop when done using the table saw.
|
|
|
20.
|
It is always
unsafe to reach over the __________ when the saw is running.
|